Materials »» Stainless Steel Wire, 316 Stainless Steel Spring Wire |
||||||||||||||||
|
At Radcliff wire we offer a large selection of stainless steel wire to choose from. Different types of stainless steel wire including: 302 stainless steel wire, 304 stainless steel wire, 316 stainless steel wire, 17/7 stainless steel wire, A286 stainless steel wire, Nitronic 32 stainless steel wire, Nitronic 50 stainless steel wire and 430 stainless steel wire, are available in all of the different tempers. All of the above exhibit different levels of magnetism, corrosion resistance, hardness, and resistance to intergranular corrosion following welding or stress relieving to fit each individual need.
Provided below are charts displaying the various properties and specifications of the types of stainless steel wire including, A286 stainless steel wire, 316 stainless steel wire, Nitronic 32 stainless steel wire, Nitronic 50 stainless steel wire and 430 stainless steel wire, that we sell. These charts should be of assistance in helping you decide which type of stainless steel wire is best for your application. The Radcliff Wire staff is available to discuss your stainless steel wire specifications and needs to help you choose a type of wire best suited for your application and to give you the highest performance, reliability, and long life in your product. | ||||||||||||||||
| Nominal Chemical Compositions (%) | ||||||||||||||||
| Alloy | Ni | Cr | C | Mn | Fe | S | P | Si | Al | Mo | Other | |||||
| Type 302 | 8.00-10.00 | 17.00-19.00 | 0.150 | 2.00 | BAL. | 0.030 | 0.040 | 1.00 | 0.75 | CU .75 | ||||||
| Type 304 | 8.00-10.50 | 18.00-20.00 | 0.080 | 2.00 | BAL. | 0.030 | 0.045 | 1.00 | N .10 | |||||||
| Type 304L | 8.00-12.00 | 18.00-20.00 | 0.030 | 2.00 | BAL. | 0.030 | 0.045 | 1.00 | N .10 | |||||||
| Type 316 | 10.00-14.00 | 16.00-18.00 | 0.080 | 2.00 | BAL. | 0.030 | 0.045 | 1.00 | 2.00-3.00 | N .10 | ||||||
| Type 316L | 10.00-14.00 | 16.00-18.00 | 0.030 | 2.00 | BAL. | 0.030 | 0.045 | 1.00 | 2.00-3.00 | N .10 | ||||||
| Type 430 | -- | 16.00-18.00 | 0.120 | 1.00 | BAL. | 0.030 | 0.040 | 1.00 | ||||||||
| 17-7PH* | 6.50-7.75 | 16.00-18.00 | 0.090 | 1.00 | BAL. | 0.030 | 0.040 | 1.00 | .75-1.50 | 0.75 | Cu .50 | |||||
| A-286** | 24.00-26.00 | 13.50-16.00 | 0.080 | 2.00 | BAL. | 0.025 | 0.025 | 1.00 | 1.00-1.50 | Ti 1.90-2.35 | Co 1.00 | |||||
| NITRONIC 32* | 0.5-2.50 | 16.50-19.00 | 0.150 | 11.00-14.00 | BAL. | 0.030 | 0.060 | 1.00 | N .20-.45 | |||||||
| Alloy | Characteristics | Typical Specifications | ||||||||||||||
| Type 302 | Similar to T-304, higher carbon content for greater strength (All grades hardenable only by cold working) | AMS 5866 | ASTM A 313 | |||||||||||||
| Type 304 | General all-purpose grade, good corrosion resistence and strength, slightly magnetic when cold worked | ASTM A 580 | ASTM A 313 | |||||||||||||
| Type 304L | Lower carbon content for improved resistence to intergranular corrosion following welding or stress relieving | ASTM A 580 | ASTM A 240 | |||||||||||||
| Type 316 | Superior corrosion resistence, slightly magnetic when cold worked | ASTM A 580 | ASTM A 313 | |||||||||||||
| Type 316L | Similar to T-316, superior resistance to intergranular corrosion following welding or stress relieving | ASTM A 580 | ASTM A 240 | |||||||||||||
| Type 430 | Non-heat treatable, magnetic, fair corrosion resistance | ASTM A 580 | ASTM A 240 | |||||||||||||
| 17-7PH* | Good corrosion resistance, heat treatable to higher hardness, non-magnetic | AMS 5678 | ASTM A 313 | |||||||||||||
| A-286** | High strength and corrosion resistance, but higher in strength, virtually non-magnetic | AMS 5525 | ||||||||||||||
| NITRONIC 32* | Similar to T-304 in corrosion resistance, but higher in strength, virtually non-magnetic | ASTM A 580 | ASTM A 313 | |||||||||||||
| *Registered trademarks of Armco, Inc. | ||||||||||||||||
| **Registered trademark of Allegheny Ludlum Corp. | ||||||||||||||||